Omega Diamond Wall One-Coat

Diamond Wall, when mixed with sand and water on the job site performs like traditional stucco with enhanced strength and durability. The Omega Diamond Wall Insulating Exterior Stucco System is a proprietary mixture of Portland cement, sand, fibers, water and proprietary ingredients reinforced with wire fabric or metal lath, and can be applied to substrates of expanded polystyrene, extruded polystyrene and polyisocyanurate foam plastic insulation boards, Foam-Core Board Lathing Material, concrete or concrete masonry, wood structural panels, fiberboard, and gypsum sheathing.
Request MSDS, ICC Report, and Spec Data or visit Omega Products International for submittal documents.
FoamTek 20, 30, and 60 are cement-based polymer-modified materials manufactured with size 20, 30, and 60 aggregates. FoamTek is formulated for use as a base coat and as an adhesive for attaching and coating architectural foam shapes. FoamTek is packaged in moisture resistive 50-pound bags.
Request MSDS, ICC Report, and Spec Data or visit Omega Products International for submittal documents.
Type I/II Portland cement is general all-purpose cement for use in most general construction applications. Portland cement Type I/II is safe for use in any application where protection against moderate sulfate alkali is required. The designation indicates low alkali, thereby reducing the potential for damage due to alkali-aggregate reactivity. Consistency in strength, color, fineness, chemical composition and set time provides users with consistently high quality finished products.  
Request MSDS, ICC Report, and Spec Data or visit Salt River Materials Group for submittal documents.
Type S Lime, also known as calcium magnesium, is a fine white powder produced by calcining high purity dolomitic limestone, followed by pressure hydrating and milling the lime. When mixed with Portland cement, sand, and water, it is the key ingredient in the mixing of highly plastic workable mortar needed for durable, water resistant masonry. Type S Lime is recommended for stucco use in scratch, brown, and finish coats. Type S Lime is also effective for soil stabilization and drying up wet clay soils at construction sites. Type S Lime can also be used in Portland cement concrete as a water-proofer and to aid pumping of grout and concrete. Type S Lime is packaged in 50-pound multi-wall paper bags.  
Foam-Kote is a polymer-modified Portland cement product designed for laminating expanded polystyrene (EPS) foam to approved substrates and as a coating for EPS to which various finishes may be applied. Acceptable substrates for Foam-Kote are concrete walls, conventional stucco brown coats, Western 1-Kote walls or EIFS base-coated surfaces. Foam-Kote is available in a Fine and Medium sand blend. The Fine sand is the preferred base for acrylic finishes. The Medium sand provides a better key for bonded exterior stucco finishes.  
Request MSDS, ICC Report, and Spec Data or visit Western Blended Products for submittal documents.
DryBond is a high-performance, dry blend, polymer-modified cement adhesive and base coat manufactured with high-grade aggregates, cement, and polymers. DryBond may be used as an adhesive and base coat for expanded polystyrene (EPS) foam shapes and as a leveling coat over approved substrates. It is packaged in moisture resistive, 50-pound bags.
Request MSDS, ICC Report, and Spec Data or visit Omega Products International for submittal documents. 
Plastic Cement is manufactured specifically for the plaster/stucco industry. Air entrainment and other special additions in Plastic Cement help create mixes with consistently high workability and homogeneity. Whether applied by hand or pump, Plastic Cement provides users with superior placeability. Since all ingredients are carefully mixed at the plant, plastic cement requires no addition of lime or any other plasticizing agents at the time of mixing. This property provides users with the highest reliability and consistent architectural performance.
Request MSDS, ICC Report, and Spec Data or visit Salt River Materials Group for submittal documents.  
Silica sand is a finely ground silica product used in the manufacturing of building materials such as stucco, mortar and grout, and in fiberglass and ceramics. We carry #16, #20, and #30.  
UltraKote One-Kote Stucco System is a proprietary mixture of Portland cement, sand, glass fibers and proprietary ingredients reinforced with wire fabric or metal lath and applied to substrates for expanded polystyrene insulation board, gypsum sheathing, fiberboard, plywood or oriented strand board. The system is installed on exterior walls of wood or steel stud construction. UltraKote is also applied over concrete or to masonry units with or without lath.  
Request MSDS, ICC Report, and Spec Data or visit UltraKote Products for submittal documents.